Hello,

I'm a novice in this arena of sophisticated scan tools and am emailing to understand if one of your VXDiag tools may help.

I have a 1999 Chevrolet K1500 Suburban with the 5.7 liter vortec motor. I would like to be able to bleed the ABS module and set the cam retard when installing a new distributor. These things not possible with an ordinary obs2 scanner.

Please advise if this device below would help:
Newest Version VXDIAG VCX NANO for GM/OPEL GDS2 Tech2WIN Diagnostic Tool

And how I would connect it to my vehicle and a laptop. I have a Microsoft Surface laptop with Windows 10 installed. I also have a 2004 Buick LeSabre and will likely need diagnostic service on that as well.

Thanks for your help,
Matt

Hello! I want to buy vxdiag gm. Is there any problem to ship to Portugal? How much time does it take?

Thank you

Howdy!

I’m having issues with my gauge cluster in my 2011 Chevy Volt.

I hear I need the VCX NANO and SPS? to reprogram my new cluster.

Can you help direct me on what exactly I need to purchase to make this happen? Appreciate the support in advance!

I just tested the interface and Tech2win on a 2009 GMC Savannah full size van. I was able to connect, read engine data, read other modules data ( BCM ETC) with no issues.

how long is warranty? and will item ship from UK or China?

I recently bought a 2019 Chevy Colorado WT. The truck is lacking a lot of features but they are present, just not coded in the vehicle computer. Can this device code things like keyless entry and remote start to the computer?

Good morning,

I have a problem on my 1999 chevrolet blazer. I lost the remote control. in the European versions, to reprogram a new remote control, I need a 5-digit code that is registered in the ecu. with tech 2 + tis 2000 you can find this code. I wonder if it is possible to do it also with VXDIAG for GM before proceeding with the purchase. thanks

I have one of these and can confirm it works great. I have the blue one, bought from vxdiagshop.com and it works with all Makes/Models... Software was a pain to setup, found out what I was given required 32bit windows for some reason. It will do anything a tech 2 can do. ABS bleeding, BCM AND ECU programming.

Works great! Used this on a 2001 s10 and was able to do a crank position sensor relearn. Ran tech2win on windows 10 x64 without having to run any sort of VM. Also was able to change tire size (after 15+ years of the spedo reading incorrect!). Able to pull airbag code history, Cam error pid, etc. Wonderful product!

Good day!

I bought a VCX NANO FOR GM OPEN GDS2 a couple of months ago.
I have a 2009 GMC Sierra 1500 that needs diagnostics and may need a BCM / body control module flashed and programmed to it.

Will I be able to test and program this truck with this tool?

Thank you,

I used a VCX Nano dongle, so with the cost of that, joining fee for the GM portal, plus 2x 1-hour subscriptions (I didn’t realise the first hour I bought would start immediately – I didn’t have the dongle at that point) cost me 170€ and saved me a 6-hour round trip plus probably a hotel for the night plus whatever the main dealer charged for the reprogram. My Ampera is charging once more.

Hello I bought this :
http://www.vxdiagshop.com/wholesale/vxdiag-vcx-nano-for-gm-opel.html
After installing all the software and drivers I did a self test on DX and it did say all ok
I have a 2007 Chevy Averlanche
Did sign up for 2 year AC Delco Vehicle Programming Software when I go to SPS it will not show the VXDIAG in selection only some other tools J2534Tool and Tech2 Legacy Pass Thru and Tech2 Remote.

I do not feel like to move forward and start to program my ECU at this point please let me know

Hi, will this unit work with the Cadillac deville 2001? If yes does it do checks on the A/C module also? How hard is it to install? Does it need any other software from acdelco to work on Tech2?

Very very very fast shipped. Works excellent so far. Had some trouble with tech2win to work in the beginning but i managed to work that out :)

Dear sir.
I have an fault code B 101e ,
no security code programmed on my Opel Astra J 2010.
I was adviced to perform " Learn Immobilizer "
with diagnostic tool. so im intrested to know is it possible to perform that programming with your diagnostic tool VXDIAG VCX NANO.

I recently purchased a VCX Nano for GM (no wifi). The unit is in perfect working condition with no cosmetic damage and includes original packaging.

Hello Sir
we buy from you VXDiag GM, we cant conect to Chevrolet Captiva from 2009 year
for 2009, we have only Daewoo

Dear Sir,

I like ask you why when we use GDS2 for Chevrolet in list we have only two year 2002 and 2003, for opel start from 2009 year.

Regards
Kire

Sales,

I recently purchased a VXDiag VCX Nano for GM vehicles for use with Windows XP computer. Unfortunately the VX Manager software does not install correctly on my laptop and thus does not communicate with my truck.

I believe I need a different VX Manager package if that is the case can you supply suitable software.

Regards,

Dennis

Hello, I am interested in purchasing the VXDIAG for GM and I was wondering if I can use this to upgrade vehicle PCM to latest calibrations? And if so, how? I assume it would require a subscription to GM online software.