Hi, I was trying to track my package but in the website you sent to me it didn't appear anything, can you help me?


Thanks
 

I am contacting you about the license for a vcx nano device. The license is expired and instructions are to contact for license exnternsion. Serial number n52gm****

Thanks. I did my Crank Variation Relearn with my VXDIAG I got a few days ago.

Using a Win 10 Pro 64bit Laptop,follow the software installation guide and everything works good on my 2020 Astra k with new 1.2 engines

I have an older xp laptop used for tech2/win. I needed the CD for the Vxdiag I purchaced because I have trouble downloading the GMsowftware

The VCX Nano GM is the way to go - comes with a less than legit but functional copy of Tech2Win and works with GM's full fat programming software. Tech2Win has been handy for programming remotes and enabling cruise control. Dealer software ($40 for 2 years of unlimited programming of all modules on one VIN) worked a treat for programming a new TCM in my '06 after the old TCM started hot-bugging.

It works. And I have even flashed my vcm with it using ac delco sp online software. I have scanned the vcm, airbag, srs and ipc codes with mine.

Works perfect. I personally used it to: - Diagnose fuel pump function - Factory reset throttle body blade after cleaning - Theft lock unlock factory stereo - Programmed new key fobs This works on more than just Corvettes and cheaper alternative to GM Tech II.

I purchased VCX NANO For GM/OPEL GDS2 Diagnostic Tool and I need assistance with downloading the software to my computer. 

 

I did purchase from you the one for GM and it was excellent.

I received the vcx nano along with GDS2, GM's own programing software , i can adjust parameters on some modules and its the best diagnostic tool i can buy but as far as programming modules. i have to log into the GM TIS website, type in the VIN and all the files for your car will be listed. For the causal user i will buy a two day pass to the website for only 40 dollars

hello. i received a usb with the vx manager program and licences for everything i needed but the program was deleted somehow and now i dont have the proper licenses. i downloaded vx manager from your website and when i loaded it up,it says i don't have any licences available. please help 

Hello I bought a vxdiag and it does not work for me with gm truck it says that it does not accept protocol j1708 engine 6hk1-tc 1999.  Not even with an isuzu 2000 of the same engine

Can confirm, using GDS2. Personally I've done EPB calibration, release etc, I've done steering angle reset and can control everything the BCM does too e.g. unlatch boot, lock/unlock, etc. etc. I have seen the ability to do the brake bleed but I haven't actually done it myself. Reprogramming requires TDS subscription.

I decided to go with the vxdiag vcx nano tech2win instead. It has the gm mdi. You need your own laptop. Just got it loaded and running on the laptop. Its a pain to get up and going however its seems to work well.

I was able to get my 2013 Chevy Volt back on the road after the dealership quoted me 14k to change out my high output battery because it had a hard interlock check engine code. It wouldn't start or charge. 1 hour later and a subscription through Acdelco I did the available updates and was able to clear the codes and we're able to charge and drive the car again. The dealership had done a software update on the car for a high voltage output error when we got the reduced propulsion power error it completely locked up the car this time. We had the issue before but we we're able to charge the car and it would reset it.

I got this VX GM and the Ford one. I got free IDS, Tech2, and GDS. if you can go through and setup stuff on a pc, your good. I use the OEM software all the time, works amazing. I have had some issues with it randomly shitting down on me, but I restart and go back at it. I flash GM with mine all the time now. Code radios, other stuff daily. For the money, you should buy it.

Hello
Dug out an old laptop with windows 7 home premium 32 bit & The GM tech2win software works on that one,slow but it does work

I purchased VXDIAG VCX Nano Diagnostic Programming System Compatible for GM/Opel from Amazon and after downloading the programs, the GDS2 software says no valid lease found. I have clicked on the update license but it still says that it is invalid. What are the steps to resolve this issue? 

Received the package. I have used it with GM sps service for 2003 gmc truck ecu replacement with no problem. subscription to oem was required. accepted as a mdi device.