VXDIAG VCX SE for Subaru OBD2 Diagnostic Tool 1. Software version: V2022.1 2. SSM3 supports vehicle 2005- 2022 year, ssm4 support vehicles 2016 onwards 3. Offer Free DONET 4. Support to add license for other brands. 5. Can Choose 2 More Car license for free, Choose any 2 from JLR SDD, FORD/MAZDA, GM, VW, VOLVO, TOYOTA, HONDA.
Hello
The license is lifetime. Only need to update firmware and license to renew on vx manager every 60 days in your side. It is free.
byMr.Krystianon Nov 22, 2023
I reinstalled the system on W10 64bit. What else can I do? I bought the device on Aliexpress from the official store. Serial V94se14686. I installed ssm3 several times.
Replied byJaneon Nov 22, 2023
Hello
We are one of vxidag dealers, www.vxdiagshop.com. Not aliexpress seller. Please contact your aliexpress seller to get support directly.
byMr.Krystianon Nov 21, 2023
Hello. I have a problem with connection. Windows 11. SUBARU Select Monitor III Communication Initialization Failed Communication initialization cancel
Replied byJaneon Nov 21, 2023
Hello
We only tested with windows 10 pro 64bits system. Would you please change system to try again?
byMr.Huseyin Selenaon Mar 24, 2023
I was able to get the Subaru Select Monitor III software with the VXDiag tool to clear the Transmission diagnostic memories and complete the relearn on the CVT.
I've got a VXDiag that I pair with SSM4 that works well.
byJacek Golebiowskion Feb 16, 2023
It's my second vxdiag, first also for subaru it's pretty old so i decided to buy new one, 1 thing first i can honestly say that it's much faster, a way faster then my old one.With Odis or different software it works like a charm. Unfortunately there is but, I hoped that i will be able to do full systems scans at ones in SSM 3 " All system diagnostic " but it doesn't work with this new tool like it didn't with old one , that is why I give 4/5 stars.
Replied byJaneon Feb 16, 2023
Hello dear
Thanks very much for your feedback. We are so appreciated for your satisfaction on our devices.
We have confirmed with factory, they said the device only supports single system diagnosis at the moment.
Regards
vxdiagshop.com
byMr.Tyson V.on Dec 20, 2022
Used on my 05 Legacy GT Used with SSM3 Worked as expected. Need to be somewhat technical to setup ssm3/4. Also paired Used ecu on a 2016 forester for a friend. Worked great. Worth the $ since dealer charges about the same to do the work. To do full new keys you need to have brand new unregistered keys.
byMr.Adam Kirklandon Dec 15, 2022
I'm using the VXDiag Tool.It's significantly cheaper than the other options. I have it running on an old Win7 PC.It works and doesn't cause harm it's certainly an exciting DIY option given the price range
I was able to get the Subaru Select Monitor III software with the VXDiag tool to clear the Transmission diagnostic memories and complete the relearn on the CVT.
byMr.Shane Johnsonon Nov 15, 2022
I have the VXDIAG - Subaru Works fine with the SSMIII software included although there's limited modules you can access on my 2004 FSTI (it's K-Line which is pre-canbus), i've added transponders to the immobiliser and general engine ECU logging and fault clearing. Should be a much more useful tool on the later full canbus cars.
byMr.Jacekon Oct 6, 2022
Hello. Are the devices shipped from the European Union? How long does delivery to Poland take? How much does the Subaru license cost when I have a vcx se device?
Replied byJaneon Oct 8, 2022
Hello
Sorry for late reply due to our National Day holiday. We can send the device from EU warehouse, when you got it, please send device s/n to us, we will activate license for you.
Regards
vxdiagshop.com
byMr.Nabugo Patrickon Aug 31, 2022
I have SSM4 fully working with the VXDiag module, and can communicate on newer vehicles, erase codes, perform module programming, etc.
byTrygveon Mar 23, 2022
Hello
Where do i find the code to use the obd without cable?
Replied byJaneon Mar 23, 2022
Hello
The wifi password is 12345678.
Regards
vxdiagshop.com
byDavid Riston Jan 22, 2022
I purchased this unit to do one thing, register my H001SAL002 remote start installation on an 18 outback. It will only register via SSM3 and only under the Denso option when prompted, SSM4 will not present you the option to register the OEM remote start unit. After 2 weeks of messing around, I finally got everything to work correctly and got the remote starter activated. The cost was worth every penny, some mouthbreathing small brain tech wasnt in my wifes car butchering anything and now I have to ability to directly interact with the ECU as I should be.
When everything works correctly, it does exactly what it needs to do, one star lost for having to mess around with the software, VXdiag really needs to figure out a better process to make everything work correctly without tricks.
Here are some steps to get everything working the first time:
1. Use a laptop that you dont care if you have to reset it, in fact I encourage starting with a fresh flash, DO NOT use your daily tuning laptop! You will be disappointed if you do bad things to your computer and have to start over, you've been warned.
2. DISABLE WINDOWS DEFENDER!!! If you can't do this, stop now and return this unit, DO NOT PROCEED. If you have a third party antivirus, turn it off. You only get one shot to do this right, DO NOT reboot the computer unless you have an exception setup for the patch.
3. Set your system clock to 1-1-2018, if you fail to do this, SSM4 will not install. If you change the clock later, SSM4 will lock you out and you have to reflash the system. If you dont do this, SSM4 wont even install and you need SSM4.
4. Only use the 2020.7 ISO, do not try to use the older 2018 build, it will work but will not work right.
5. ONLY install the programs from the Launcher, work from the bottom up
6. The Subaru.exe patch must be placed in and executed from c:\. If your system deletes it, you failed to follow instructions and should stop.
7. Install VXManager last, start it first.
8. Connect to the OBD interface, make sure the license updates before starting SSM3. Update SSM3 if needed before launching
9. Run SSM3 from the launcher only, it will not recognize the interface if you try to start it externally.
10. Try to scan the vehicle first, if you cant connect you wont be able to do anything else. If you made it this far you will be able to figure it out from here. Have fun.
Replied byJaneon Jan 23, 2022
Hello dear
We are so glad for your feedback on using this product and software. We will feedback to manufacture, asking them to improve the problem of software. Kindly hope your understranding.
Regards
vxidagshop.com.
byBruceon Nov 30, 2021
Hello
Do you have any tutoriel for software installation? is it compatible with windows 11?
Replied byJaneon Nov 30, 2021
Hello dear
We have software installation video on windows 7 pro 32bit.
https://youtu.be/FLKK9wKXX90
But cannot work with windows 11 yet. It can work with windows 10 pro 64bit.
Regards
vxdiagshop.com
byAlfredoon Nov 30, 2021
Hello
I wonder if there is stock in US warehouse? How long is the delivery?
Replied byJaneon Nov 30, 2021
Hello dear
For this device, there is only stock in China now, we can send by Fast DHL, usually takes 5-7 business days to arrive.
Regards
vxdiagshop.com