VXDIAG Benz X-ENTRY Error Fault (2.27) -7.870 Solution

Here is the working solution to VXDIAG VCX SE or vxdiag benz C6 X-ENTRY error 870. 

Problem:

System error (s)

Fault (2.27) -7.870

Serious fault! Please contact the User Help Desk.

Then install the C6 VCI Manager driver, it says initialization of the multiplexer failed.

Solution: 

Free download  and run VXDIAG Benz 870 error fix program here:

https://www.mediafire.com/file/lpmci9van2tict3/870.exe/file

Problem 2:

Hi i have problem with X-ENTRY original hdd soft vxdiag
Problem with c clas w205 2014r
Interface connection but not diag

System error (s)

Fault (2.27) -7.870

Solution:

Download XDOS blacklist.exe and run this program

https://www.mediafire.com/file/qnxm0tu6re3ozs6/XDOS+C6+blacklist+fix.exe/file

You need the BlackList Fix for your X-ENTRY and D-A-S system. Please note that the given 870.exe file will ONLY solve this problem for X-ENTRY. You can still have this error for older cars like W211.W203 if switched to D-A-S.

For D-A-S blacklist fix you can use the original Cal.sli from X-ENTRY\BIN folder or the one which is packed in the 870.exe file and copy to D-A-S\bin folder.

TIP: You can open the 870.exe file with WinRAR.

Make sure to make a backup of the original, just in case.

Or use this attached file which will fix for both systems and in addition will make sure that Part_Z is selected in cal.ini for VXDIAG VCX SE in C6 mode.

If you had error 870, try either 870 fix program or blacklist.exe program.

Hope it helps!