FAQ VXDIAG VCX NANO for GM Opel GDS2 Tech2WIN diagnostic scanner.
Q:Will this program any module in a 2017 Chevrolet?
A:Yes, but you need buy original GM subscription.
Q:Can i program remote keyfob for cadillac srx 2010 with this devices?
A:Yes. shouldn’t have an issue
Q:Is there update software that includes the cadillac elr?
Q:does this have everything including the program for gm?
A:This device come with hardware and software GDS2 Tech2Win, but for programming you need buy subscription from http://www.acdelcotds.com/
This one works on new vehicle
Q:Will this reprogram the body control module on a GM?
A:It will, but you do have to purchase a $40 programming subscription through acdelco and use their software while being connected to internet. It seems to cover all setting example recalibrate clutch travel and throttle response but works best windows 8
Q:can you program tpms ecu
A:Yes! This is the only one I found to work. Trust me I bought two of them the cheap one and the new and improved one.
Q:Will this product unlock a radio in Loc mode in a 2004 gmc savana? A vin relearn?
A:2004 year vehicle may not support
Q:Is this officialy licensed by gm
A:No it’s not it’s more like a clone tool but definitely works great does 99% of original tool. you can use TIS2Web and gain access to all modules in vehicle.
Q:Will this software work with 2014 Chevy Volt?
A:Yes, I used it on a 2013 volt that has electrical issues but in order to diagnose car( or in my case view individual battery cell voltages ) you must purchase a subscription from ac delco for $57 for three days of use or something like $250 for a month or about $750 for a year subscription. In order to reprogram modules you have to purchase another subscription for different software for $40 which is good for 2 years . But it only allows you to program each module in one car one time.
Q:Will this work on a 2012 gmc sierra 2500hd duramax diesel?
Q:Does it read abs codes
A:As long as you have a GM vehicle that is 2000 or newer, yes
Q:Cadilllac xts 2013 and need a module programming. it must be done with with the tech2win or with the with the passthru software?
A:for programming, you need buy subscription
Q:Will this put abs into bleed mode?
A:IF your vehicle is a 1992 – 2013 GM product, it will complete any and all function tests the GM Tech2 will perform. This is the same Tech2 software, only on your laptop. I don’t know what specific platform or model year you’re inquiring about, however if it falls under the capabilities of a Tech2, then yes, it will.
Q:Can this learn a new keyless remote to a 2008 gm vehicle (saturn sky) without a “programming subscription” or is that for ecu only?
A:For this function, need buy subscription of GM.
Q:Can i connect to the abs module in a 1996 silverado? not sure if i can use this or if i need a tech 2 specifically
A:To be clear, Tech2Win software (that DOES run on Win10 64 bit) IS the same software that runs on the Tech 2. Not the greatest interface but it works.
I obviously don’t have a 96 Silverado but I fired up the software. My vehicles don’t have abs so I’m not totally sure, would assume it would be in body or chassis diagnostics. Would need your vin and engine, there’s ten different options.
I can’t say for certain I’m looking at the right thing but I get an error saying “Tech2win does not support FWAL/4WAL protocol. ” This is where you program a new tire size so I assume I’m looking in the right place.
Depends what you’re trying to do…any newer cheap scanner should read and clear codes. Trying to program a module is another story, haven’t tried programming yet but i do have full bidirectional control on my Saturn Ion to turn on cooling fans etc.
Q:will this work on 2016 chevrolet? more specifically, will it read airbag (SRS) codes on a 2016 chevy express 3500?
A:Yes, it works
Q:Will the software clear a “service high voltage charging system” code from a 2012 chevrolet volt?
A:Yes but only after the cause us fixed
Q:Will it run on windows 7 starter 32 bit system?
A:It will work as a j2534 for most software I’ve tried. Gm GDS works with Win7 but tech2 software only works on WinXp 32 bit.
Q:works with wifi and USB? both way?
Q:I have a 2004 s10 blazer, will the reprogram the vin in the radio and reprogram the bcm for keyless? yes i’ll buy gm subscription
A:Yes this will. You have to use the software reprogramming subscription through AC Delco TDS website.
Q:Will this work on a 1995 buick with the odb 1.5?
A:It might actually! The included tech2win software goes as old as 1991. For 95 the 2.2L, 2.3L, 3.1L, 3.4L, 3.8L and more is supported. Question is what the OBD 1.5 port looks like and are the pins the same…Way cheaper than an old snapon brick!
After i installed VXDIAG full GM GDS2 software, it displayed in Chinese. I don’t understand Chinese. How can i change the software language to English?
There are 2 GDS2 2016 VMware software on desktop (if using vxdiag multi tool with hard drive)
Run GMGDS2 2016 software marked red circle in image above, you are able to change language.
Another newer GMGDS2 software does not allow to change language.
Better to install newer GDS2 2018_EN VMware software. The latest 2018 version allows to change language.
Q:Will this connect to and start the 4 wheel abs bleed function on a 1997 tahoe and 2005 escalade?
A:97 year tahoe not support, 2005 escalade support
Q:Can i use this to program a re-manufactured bcm for my 2004 chevy blazer?
A:yes, you need online authorization
Q:Will this do a vin relearn for a 2014 chevy traverse radio ??
A:Yes it should some things you need gm programming but to relearn you shouldent
Q:Will it work on Win 10 and does it include the Tech2Win software?
A:It include tech2win software, we recommend you use win7 computer, though have customer install it on win10 successfully
Q:Will this work on a 2003 Corvette?
A:Yes, it works.
Q:Can this be used to register new tpms sensors?
A:Yes, it can.
Q:Will this work with a 2008 Saab 9-3 2.0T?
A:Yes, it can works on a 2008 year saab with tech2win software.
Q:Will this perform regeneration on my chevy 2008 duramax diesel?
A:We used this with a 2005 Buick Lacrosse to program a new PCM. We did have to buy a subscription from GM for Tech2Win at https://www.acdelcotds.com. There are short term subscriptions available. There also may be 3rd party solutions available but we didn’t to fight the extra steps typically involved.
Q:will this do a relearn on crankshaft sensor for a chevy colorado 2004?
A:Yes, by using tech2win software
Q:Does the tech2win support active tests for different sensors and modules on gm vehicles
Q:Will this software work with 2014 Chevy Volt?
A:Yes, support this vehicle. You will need to use the GDS on 64bit computer and use VMware machine and your computer need at least 4gb. The software need you do more research on how to use it.
Q:I am running the usb gm version win7/64, it will work for a few minuites, then loose communication and the t2w app will crash? i have tried reinstall
A:TECH2WIN need install on 32bit computer. 64bit computer can not works well, please change computer OS and try again
Q:Last year saab owners were not able to get this to work (with 2003-2011 saabs). has that problem been solved? are saab owners able to use this now?
A:No, not support old saab
Q:Product description indicates compatible with Windows 7 32/64 bit, but reviews state only good with 32 bit. Please confirm 64 bit compatibility.
A: GDS2 works with the included software as a virtual machine with VMWare running in a decent hardware, no low end Pentiums or Celeron, please Core2Duos and up, Minimum 4GB Ram, etc., Tech2Win is working on Win 10 64bit. (HP 11 Stream). Connect Nano and manually set USB Serial port to LOWER than Com 8 and set baud to 115200. In Tech2Win Config leave as SEARCH with BLANK serial. You’ll know you’re MDI is connected correctly when you get the Select Manufacturer dialog MDI pop-up. Use only the 8 numbers from the Select Interface pop-up as your serial number leaving Com as SEARCH or what ever ELTIMA Virtual Serial Port’s Com is in Device Manager while Tech2Win is running.
Q:Will this work to reflash a 2003 gmc yukon denali ecm/pcm? also, seat control module?
A:Yes, support, but you need buy gm subscription software online.
Q:Can i read and clear codes from the driver assist module in a 2015 cadillac escalade?
A:Yes, use gds software
Q:Will the gds2 work with win 7 32 bit? or does it require 64 bit?
A:GDS can be installed on 64bit computer. You can try yourself.
Q:Will i be able to perform an abs bleed on a 2006 gmc yukon without a subscription?
A:It needs subscription
Q:Will i be able to relearn or reset my stereo system and suspension for my 2006 Corvette?
A:yes, use tech2win program
Q:Will this perform a transmission fast learn on a 2018 gmc canyon?
A: The software I was given only goes to 2017. You might try emailing vxdiagshop.com…they have been very responsive to multiple emails with decent English.